document number: 88381 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 18-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 182 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount par ? transient voltage suppressors high temperature stability an d high reliability conditions SM5A27 vishay general semiconductor features ? junction passivation optimized design passivated anisotropic rectifier technology ?t j = 175 c capability suitable for high reliability and automotive requirement ? low leakage current ? low forward voltage drop ? high surge capability ? meets iso7637-2 surge specification ? meets msl level 1, per j-std-020, lf maximum peak of 245 c ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application. mechanical data case: do-218ab molding compound meets ul 94 v-0 flammabi lity rating base p/nhe3 - rohs compli ant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 he3 suffix meets jesd 201 class 2 whisker test polarity: heatsink is anode primary characteristics v br 27 v p ppm (10 x 1000 s) 3600 w p d 5 w i rsm 70 a i fsm 500 a t j max. 175 c do-218ab maximum ratings (t a = 25 c unless otherwise noted) parameter symbol value unit peak pulse power dissipation with 10/1000 s waveform p ppm 3600 w power dissipation on in finite heatsink at t c = 25 c (fig. 1) p d 5.0 w non-repetitive peak reverse surge cu rrent for 10 s/10 ms exponentially decaying waveform i rsm 70 a maximum working stand-off voltage v wm 22.0 v peak forward surge current 8. 3 ms single ha lf sine-wave i fsm 500 a operating junction and storage temperature range t j , t stg - 55 to + 175 c
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88381 183 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 18-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 SM5A27 vishay general semiconductor note (1) measured on a 300 s square pulse width note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - power derating curve fig. 2 - load dump power characteristics (10 ms exponential waveform) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol min. typ. max. unit reverse zener voltage i z = 10 ma v z 24.0 - 30.0 v zener voltage temperature coefficient i z = 10 ma v ztc --36mv/c clamping voltage for 10 s/10 ms exponentially de caying waveform i pp = 55 a v c - - 40.0 v instantaneous forward voltage i f = 6.0 a v f (1) --1.0 v i f = 100 a - 0.95 - reverse leakage current rated v wm t j = 25 c i r --0.2 a t j = 175 c - - 10.0 thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol value unit typical thermal resistance, junction to case r ? jc 1.0 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode SM5A27he3/2d (1) 2.505 2d 750 13" diameter plasti c tape and reel, anode towards the sprocket hole 0 2.0 4.0 6.0 8.0 0 50 100 150 200 power di ss ipation (w) ca s e temperature (c) 0 1000 500 1500 2000 2500 3000 25 50 75 100 125 150 175 load dump power (w) ca s e temperature (c)
document number: 88381 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 18-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 184 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 SM5A27 vishay general semiconductor fig. 3 - pulse waveform fig. 4 - reverse power capability fig. 5 - typical instantaneous forward characteristics fig. 6 - typical reverse characteristics fig. 7 - typical transient thermal impedance 0 50 100 150 0 10 20 30 40 input peak pul s e current (%) t - time (m s ) t d t r = 10 s peak value i ppm half value - i ppm i pp 2 t j = 25 c pul s e width (t d ) i s dened a s the point where the peak current decay s to 50 % of i ppm rever s e s urge power (w) 1000 10 000 10 100 pul s e width (m s ) - ? i pp exponential waveform 100 10 1.0 0.1 0.01 0.35 0.45 0.55 0.65 0.75 0.85 0.95 in s tantaneou s forward voltage (v) in s tantaneou s forward current (a) t j = 150 c t j = 25 c 100 10 1 0.1 0.01 0.001 0.0001 in s tantaneou s rever s e current (a) percentage of v br (%) 5 203550658095 t j = 25 c t j = 175 c tran s ient thermal impedance (c/w) t - pul s e width ( s ) 100 100 10 10 1 1 0.1 0.1 0.01 0.01 r jc r ja
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88381 185 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 18-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 SM5A27 vishay general semiconductor package outline dimensions in inches (millimeters) do-218ab mountin g pad layout 0.413 (10.5) 0.374 (9.5) 0.091 (2.3) 0.067 (1.7) 0.116 (3.0) 0.093 (2.4) 0.150 (3.8) 0.126 (3.2) 0.366 (9.3) 0.343 (8.7) 0.606 (15.4) 0.583 (14.8) 0.116 (3.0) 0.093 (2.4) 0.628 (16.0) 0.592 (15.0) 0.539 (13.7) 0.524 (13.3) 0.366 (9.3) 0.343 (8.7) 0.406 (10.3) 0.382 (9.7) 0.342 (8.7) 0.327 (8.3) 0.413 (10.5) 0.374 (9.5) 0.028 (0.7) 0.020 (0.5) 0.138 (3.5) 0.098 (2.5) lead 1 0.098 (2.5) 0.059 (1.5) lead 2/metal heat s ink 0.197 (5.0) 0.185 (4.7) 0.016 (0.4) min.
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
